Rabu, 26 Disember 2012

Gundam Dynames (GN-002)


Technology & Combat Characteristics

Classified as a third generation Gundam, the GN-002 Gundam Dynames is a artillery-type MS that specializes in long-ranged sniping and the successor of GNY-002 Gundam Sadalsuudand the predecessor or GN-006 Cherudim Gundam. While the unit retains similarities to Sadalsuud, Dynames is different than its predecessor.
Dynames retains strong design aesthetics to Sadalsuud, almost twin-like superficially. However, Sadalsuud wasn't designed for advanced combat, it was designed for infiltration and scouting. Although Dynames inherited its sensor technology through Sadalsuud, the majority of the sensors was removed and replaced with armor plating and weaponry during its creation. Ironically, Sadalsuud can search and detect targets of interest far beyond what Dynames can do. To compensate for sensory limitations, Veda and Celestial Being's CIC team provides tactical data through their own systems to support Dynames in combat.
Dynames is largely a counterpart to GN-001 Gundam Exia. While Exia is themed heavily on melee combat, Dynames is the opposite. Dynames' weapon-of-choice is its GN Sniper Rifle to provide mid-to-long ranged fire support. As its primary armament, Dynames is almost exclusively used as a support sniper, taking up a well-hidden position(s) and dispatching targets from afar while Exia draws the attention and fire of the enemies. If forced into short-ranged combat, Dynames switches from the rifle to its GN Pistols, wielded and used gun-kata style. In very short range, Dynames prefers to use its GN Missiles, using its beam sabers only as a last resort[4]. While Dynames is focused on sniping, the unit was also designed to utilize a series of special equipment to adapt to various missions.
For specialized long range precision firing (though rarely used), Dynames has a special particle rifle, which it is capable of firing on orbital targets from the ground, the Super Substratospheric Altitude Gun. To prepare for shooting alone, the pilot needs to connect the weapon to a large GN Condenser and network with other computer systems to make the necessary calculations for accurate shooting. Because the blast is very powerful, Dynames' rear is connected to one of Kyrios' Tail Unit as a stabilizer to absorb the shock of the discharge. It takes roughly 30 seconds to recharge for the next shot.
Dynames can change equipment for the Torpedo Pack. The equipment is specialized for surface-to-underwater assault missions. To enhance Dynames' sensors, a sonar system and goggles are equipped for extended sensory capabilities underwater. The sniper rifle is replaced with a torpedo launcher as particle weapons are weakened in water.
When extreme firepower and defense is needed, Dynames can receive combat support from its own specialized support unit, the GNR-001D GN Arms Type-D and the Assault Container. The GN Arms itself is a customized transformable fighter, with mid-range beam weaponry and melee weapons themed after Dynames' weapons silhouette. When greater power is needed, Dynames and GN Arms can combine to become a mobile armor. Dynames' GN Drive docks right into the MA to power the weapons platform.
The Assault Container works on conjunction with the GN Arms and Dynames as a miniature armed MS carrier. It was designed to dock both Dynames and GN Arms for atmospheric entry and exit missions. It's heavily armored and has enough fire power to decently fight a United Nation Army battlefleet. Dynames' overall capabilities can be enhanced through the power of Trans-Am.
Dynames would later be succeeded by GN-006 Cherudim Gundam. While Dynames itself was critically damaged in combat, there was still spare replacement parts to rebuild Dynames. Due to Celestial Being being short on resources, engineers would later return to Dynames for a systems overhaul to modernize its systems and combat capabilities; it was categorized as GN-002RE Gundam Dynames Repair.

Gundam Arios (GN-007)


Technology & Combat Characteristics

The new fighter body of Arios is meant for high speed flight and combat and is capable of atmospheric or zero-gravity flight . The unit also duals as a semi-mobile armor against enemy units. Kyrios originally had a GN Shield that could transform into a pincer claw weapon that could grab enemy units and destroy them with an electro-blade. While Arios has no physical shield, the pincer-claw aspect was incorporated into the design of the front body of Arios's fighter form. When transformed, Arios can grab enemy units and can either remove a mobile suit out of the combat zone or literally clip them down with its GN particle infused pincer.
To increase the effectiveness and survivability of combat, GN Archer was added to Arios' overall arsenal. The unit was originally meant to be a new generation Gundam, but CB engineers evolved the design of a tail booster into a transformable MS unit for Arios. GN Archer is still a Tail Booster unit, granting Arios greater speed, maneuverability, and additional firepower with GN Missiles; the GN Cannonaspect of the original Tail Booster was never incorporated. GN Archer can break off from Arios for independent combat to help relieve Arios on missions, but need to return to Arios to recharge as the unit is dependent on GN particles.
The Arios is also better at hiding its Gundam identity in jet mode, as the Kyrios exposed its Gundam face during flight, while the Arios has its face tucked into the chest. This was probably included in the design to add the element of surprise into Arios' earlier missions, in the same fashion as Kyrios.
Just like its predecessor, it carries a twin beam rifle as it's primary weapon and a pair of beam sabers for melee combat. Arios' forearms contain sub-machine guns for rapid fire to spray a hail of beam fire against enemy units and can attack at greater speeds. It carries two GN Beam Shield emitters on its shoulders that can generate a protective GN field, thus a physical hand-held shield was not made. For Arios to transform into mobile suit mode, the legs extend from their fixed position, and the feet fold inwards, covered by the sub wings on the legs. The large wings on the knees flip inwards to become Arios' kneecaps. The arms will then unfold from their locked in position and the rear skirt rotates downward. The sensor on Arios' nosecone flips backward, allowing the pincers to fold downwards and serve as shoulder armor. The head then untucks from its fixed position, revealing the transformed Arios

Selasa, 25 Disember 2012

Ducati 1199 Panigle


At the time of its release, the Ducati 1199 Panigale was the world's most powerful production twin-cylinder engine with maximum 195 horsepower (145 kW) at 10,750 rpm and 98.1 lb·ft (133.0 N·m) torque at 9000 rpm. With a dry weight of 164 kg (362 lb) (188 kg (414 lb) curb weight), the 1199 has the highest power-to-weight and torque-to-weight ratios among production motorcycles. The new Superquadro engine is massively oversquare, with a bore:stroke ratio of 1.84:1. Whereas previous Ducatis had belt-driven overhead cams, this engine's valvetrain uses gears and chain. The engine serves as astressed member, enabling the Panigale to be smaller and lighter than a conventionally-framed motorcycle.

Megelli 250rr



Pertamanya Megelli ini Diasaskan di Akses Barry Hallpusat reka bentuk motosikal 'maya' pakar danditubuhkan UK kenderaan pengeluaran dan kemudahan kejuruteraan membolehkan syarikat itu untukmaju dari wawasan yang awal kepada pengeluaran motosikal dalam tempoh tiga tahunLakaran reka bentuk asal telah dihasilkan pada Julai 2005 dan ujianpengeluaran bermula pada bulan September 2007Menjelang Disember 2007 julat adalah dijual di seluruh dunia.Megelli Motorsikal adalah direkadan kejuruteraan di UK menggunakan alat yg pesat lebih dahulu baru bagi majoriti komponen denganpemasangan akhir di ChinaKira-kira 75% daripada komponen daripada syarikat-syarikat TaiwanIni termasuk enjin dengan spesifikasi tinggi silinder bersalut seramik dari SYM dan speedometer dariKOSORangka utamalengan berayun, rangka kecil dan buaian enjinsemua komponen yang lainjuga daripada syarikat-syarikat berasaskan Taiwan.

 Megelli merupakan sebuah penciptaan Motor-Bike dari pasukan di SLD UK Ltd (Inggeris)

"Megelli adalah idea asli, dengan realisasi dalam masa 3 tahun".

Dengan Menggunakan kekayaan pengetahuan di salah satu pusat terkemuka reka bentuk motor diEropahiaitu pengeluaran kenderaan di UK pada khususnyaMegelli mempunyai sisi kejuruteraan,fungsikehandalan dan penampilan yang menakjubkan.


Dugaan Mengenai Megelli 250 RMegelli 250 RE dan Megelli 250 RV adalah MOTOR CHINAmerupakan sebuah kesalahan BesarDisebabkan Megelli merupakan sebuah Motor yg dihasilkan oleh Megelli Corporation di UKDan Mesinnya dihasilkan oleh Sachs di German dan Edi progetti dari Italy. 

Gundam Exia (GN-001)


Technology & Combat Characteristics

A 3rd-Generation Gundam, Exia is designed to be a close quarters combat (CQC) type mobile suit (MS). The unit is the successor to GNY-001 Gundam Astraea and one of the predecessors to GN-0000 00 Gundam; much of Exia's design was heavily influenced from the Astraea. While there are strong similarities to Astraea, Exia has its own differences from weapons to systems.
Exia was created as a high-mobility unit to greatly supplement its CQC role. In order to maximize its potential in speed and movement, its legs was given the best human articulation as possible to improve its Active Mass Balance Auto Control(AMBAC).[1] The trade-off is the reduction of armor parts in several joints that reveal its internal frame; its MS frame is more vulnerable against enemy attacks.[1] However, the pilot can defend against enemy attacks with Exia's GN Shield. It's high mobility design has served Exia well as it has the lowest being-hit rate amongst the four 3rd-generation Gundams.[1]
The Seven Swords System refers to the wide array of GN Blades that was designed and used on the Exia.[2] While, redundancy and flexibility was built into the weapons selection for multiple scenarios and specializations in close combat situations, this was intentional as Exia's armaments were solid armaments instead of beams. The development of solid state swords was to anticipate against enemy units that could potentially rival the other Gundams. The sheath of GN Particles surrounding the blade interact with and eventually negate the tightly clustered particles of a GN Field for direct penetration.[citation needed]
Exia's head contains the blackbox device used for quantum communication interface with Veda as well as some particle control ability.[1] Its GN Condensers also can show visually the amount of particles it holds as well as the particle compression rate it is currently using.[1] This ability is also used for secret communication with friendly forces.[1]
When extreme firepower and defense is needed, Exia can receive combat support from GNR-001E GN Arms Type-E and the Assault Container. The GN Arms Type E itself is a customized transformable fighter, with mid-range beam weaponry and melee weapons themed after Exia's weapons silhouette. When greater power is needed, Exia and GN Arms can combine to become a mobile armor. Exia's GN Drive docks right into the MA to power the weapons platform. If a situation arises where greater speed is needed, Exia can be equipped with its own specialized armor, the Avalanche Pack, which would be later upgraded into the Avalanche ` Pack.
The Assault Container works on conjunction with the GN Arms and Exia as a miniature armed MS carrier. It was designed to dock both Exia and GN Arms for atmospheric entry and exit missions. It's heavily armored and has enough fire power to match an entire ESF battlefleet.
In addition, the Exia's extension cone chassis possess an ability that can temporarily increase the output of the equipped GN Drive and the ability of the suit temporarily in "burst"-like mode.[1] However, this ability was rarely used as it is considered unstable however it was seen to be used in its upgraded form, the Exia Repair II.[1][3] Exia's overall capabilities can be enhanced through the power of the Trans-Am System. With the Seven Sword armament combined with the skills of Meister, Setsuna F. Seiei, the Gundam Exia was a machine to be feared in close combat.

New Lomborghini


The new Lamborghini LP700-4 Aventador based on an innovative monocoque made of carbon fiber That combines exceptional engineering of lineweight with the highest levels of rigidity and safety. 2012 Lamborghini LP700-4 Aventador equipped with a V12 liters’ displacement with 6.5 and 515 kW / 700 hp.
Aventador has the fantastic 0-100 km / h (0-62 mph) acceleration figure of just 2.9 seconds and the top speed of 350 km / h (217 mph) and fuel consumption and CO2 emissions are down by around 20 percent compared with its predecessor, despite the considerable increase is in power (+8%).
The spacious interior combines exclusive Aventadors fine quality materials and superb Italian Craftsmanship with advanced technology. The red cover of the switches on the center console wide Surrounding the start button is Used to arouse the twelve cylinders. The interior is dominated by a high-tech dashboard, the instruments are presented on a TFT LCD using the innovative display concepts. A second screen is dedicated to a standard multimedia platforms and navigation system.

Model Ferrari Yang Terlaris.......

  
           Dengan reka bentuk yang dinamik ,kereta buatan Ferrari ini mampu memecut 300km ,denganmengunakan engen V8 TwinTurbo.
           Model Ferrari 430 Scuderia ini juga adalah yang terlaris sekali di Malaysia selepas model sebelumnya iaitu Ferrari 360 Modena.
           Tidak hairanlah kalau harga bagi sebuah kereta buatan Italy ini mencecah jutaan ringgit dan menjadi kegilaan orang ramai .